Using the bead lever tool, lift the tire bead over the demounting lip of the head.
The bead lever tool must be pulled down parallel to the rim.
Press the wheel rotation pedal
to rotate the wheel clockwise.
Remove the bead lever tool from the tire when it easily slides out, approximately after a
quarter rotation of the wheel.
Continue to press the wheel rotation pedal
to rotate the wheel clockwise until the
entire bead is lifted from the rim.
Lift tire and repeat this procedure for lower bead.
Lift the mount/demount arm assembly up and away from the wheel.
Remove tire from rim.
For additional information on demounting special wheels, refer to "Advanced Demounting
Procedures," page 51.
30
Operation Instructions for TCX56/57 Tire Charger