Power Supplies; Ie048-480 Power Supply - Allied Telesis IE340 Series Installation Manual

Power Supplies

IE048-480 Power
Supply
49
IE340 switches can be powered with the IE048-480 power supply from
Allied Telesis. They can also be powered with power supplies from third-
party manufacturers that meet the requirements in Table 9 on page 51 and
"Power Specifications" on page 130. They should also support the
environment of the location site.
Warning
Use a UL-listed DC power supply with 48VDC/10A output. It should
be suitable for the operating altitude and maximum ambient
temperature of the physical location of the switch. Refer to the
installation instructions from the manufacturer for installation and
safety guidelines.
The IE048-480 power supply endures harsh environments such as those
found in industrial applications. Here are main features:
480W output power

Wide input voltage range: 85 ~ 264Vac

Wide operating temperature range: -25 ~ 70°C

Electromagnetic immunity (EMI) suitable for industrial applications

High efficiency: 94% @230Vac

150% peak current capability

Active PFC: PF type. 0.93 @230Vac

Protection circuits: peak-current, over-current, over-voltage, over-

temperature
Remote ON/OFF

Output power confirmation relay (DC_OK)

DIN rail mount

Warning
The IE048-480 power supply and other non-compliant UL/EN/IEC
61010-1 and 61010-2-201 power supplies must be installed in fire
protection enclosures when installed on walls of combustible
material (e.g., wood). Additionally, the floor area directly below the
power supplies should be non-combustible (e.g., metal or concrete)
and free of combustible material (e.g., paper, plastic, or wood).
Chapter 1: Overview