Antenna - DFI VC230-AL User Manual

Assembly
X

Antenna

Besides the GPS antenna, there is an additional antenna hole reserved on the front panel and
by default covered by a metal bracket. Please remove the metal bracket by unscrewing the two
zinc-coated screw prior to installing an antenna.
„ GPS Antenna
(SMA)
„ FME Antenna hole
with bracket
Before installing the antenna, please make sure that the following safety cautions are well-
attended.
1. Make sure the PC and all other peripheral devices connected to it has been powered
down.
2. Disconnect all power cords and cables.
Connect the internal cable to the board's antenna connector, screw the antenna connector
through the antenna hole on the front panel with washers and nuts, and screw on the antenna
as illustrated below.
Board Connector Cable Antenna Connector
User's Manual | VC230-AL
x2
Front Panel
Washer Nut Antenna
Chassis Wall
Chapter 2
HARDWARE INSTALLATION
12