I/O Ports (System Board)
Expansion Slots
X
X
Please follow the steps below to install the card into the socket.
User's Manual | VC230-AL
Step 1:
Insert the card into the socket at an
angle while making sure the notch
and key are perfectly aligned.
Step 2:
Press the end of the card far from
the socket down until against the
stand-off.
Step 3:
Screw tight the card onto the stand-
off with a screw driver and a stand-
off screw until the gap between
the card and the stand-off closes
up. The card should be lying paral-
lel to the board when it's correctly
mounted.
Installing Micro SIM Card
Step 1:
Slide the cover to unlock.
Step 3:
Orient the SIM card and place it into
the socket.
Chapter 2
HARDWARE INSTALLATION
Step 2:
Lift the cover.
Step 4:
Close the cover and slide the cover
to lock.
26