Super Io Configuration; Vehicle Configuration - DFI VC230-AL User Manual

Advanced
X

Super IO Configuration

COM Port 1
Enable or disable each serial port.
Disable Disable this serial port.
Enable Enable this serial port.
It also shows the Base I/O address and the assigned interrupt number.
Type
Choose RS232, RS422 or RS485 (Peer-to-Peer) for the serial communication type for COM port
1 and 2.
WDT
Enable or disable the watchdog function. A counter will appear if you select to enable WDT.
Input any value between 1 and 255 (seconds).
User's Manual | VC230-AL
Advanced
X

Vehicle Configuration

In-vehicle Battery System
It displays the in-vehicle battery used: 12V or 24V.
System on delay
Select the system-on delay time: 0 to 36000 seconds (default: 10 seconds).
OS Protection Time
Select the OS protection time to allow the system to shut down completely before the system
powers off: 120 second to 36000 seconds (default: 180 seconds).
Battery Low Monitor
Enables low-voltage protection to protect your car battery (default: Enabled).
Battery Low Voltage
The system remains power-off or will automatically shut down if the car battery is below the
specified voltage. (default: 10V for 12V battery & 22V for 24V battery).
Chapter 3
BIOS SETTINGS
36