NEX ROBOTICS FIREBIRD V ATMEGA 2560 Hardware Manual page 104

6.6 Identifying and changing COM Port number of the USB to serial
converter or XBee USB wireless module
In some software you may need to tell the COM port number before establishing
communication. Follow these steps to identify or change the COM port number. Don't change
the COM port number unless it is absolutely necessary. It may result in making some of your
software unstable.
Step 1:
Right Click My Computer and click on properties. System properties window will appear.
Step 2:
Click on the Device manager in the Hardware tab.
© NEX Robotics Pvt. Ltd. and ERTS Lab, CSE, IIT Bombay, INDIA
Fire Bird V ATMEGA2560 Hardware Manual
Figure 6.10
Figure 6.11
104