Festo CPX Series Manual page 30

2 Installation as function module F24
Sub-D plug
Alternatively, you can connect the CPX terminal with sub-D plug from Festo.
• Observe the assembly instructions for the fieldbus plug.
• Clamp the screening of the field bus cable under the clamp strap of the sub-D plug from Festo.
Note
The clamp strap in the field bus plug is connected internally with the metal housing of
the sub-D plug.
Connection *NC* must not be connected.
1
1
Folding cover with inspection window
2
Field bus cable, seal unused connection with
blanking plate (IP65/IP67)
3
Clamp strap for screened connection
Fig. 2.6 Fieldbus plug from Festo, type FBS-SUB-9-GS-2x4POL-B
30
2
4
Terminal strip for field bus incoming or
continuing
5
CPX-FB23-24 (shown at reduced size)
Festo – P.BE-CPX-FB23-24-EN – 1305a – English
3
4
5