Pepperl+Fuchs VBG-PB-K25 Manual page 79

Byte 1
Byte 2
Byte 3
Byte 4
...
Byte 12 00
The call of the command interaface has not been answered with the valid values
since the toggle bit has not been set.
Set of toggle bit:
Byte 1
Byte 2
Byte 3
Byte 4
...
Byte 12 00
Result: See chapter 8.1.2 "Values for Results"
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
Byte 8
Byte 9
Byte 10 16-bit channel 4 low byte
Byte 11 00
Byte 12 00
To get the input data again, the T-bit has to be reset again.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Response
00 (or old values)
hex
00 (or old values)
hex
00 (or old values)
hex
00 (or old values)
hex
...
(or old values)
hex
Request
50
hex
80 (toggle bit, result)
hex
1D (slave address 29)
hex
00
hex
...
hex
Response
50
hex
80 (toggle bit, master1)
hex
16-bit channel 1 high byte
16-bit channel 1 low byte
16-bit channel 2 high byte
16-bit channel 2 low byte
16-bit channel 3 high byte
16-bit channel 3 low byte
16-bit channel 4 high byte
not used
hex
not used
hex
AS-i/PROFIBUS Gateway
Command Interface
hex
hex
hex
hex
hex
hex
hex
hex
Copyright Pepperl+Fuchs, Printed in Germany
77