Self-Test; General Settings; Hot Backup; Synchronization - NovaStar NovaPro UHD Jr User Manual

NovaPro UHD Jr All-in-One Controller
User Manual

5.8.4 Self-Test

You can test the device by yourself when the device fails, then feedback the result to
NovaStar.

5.9 General Settings

Figure 5-25 General settings

5.9.1 Hot Backup

The NovaPro UHD Jr supports two hot backup modes: Set as Primary and Set as
Backup.


When the primary device fails, the backup device will take over the work in real time.

5.9.2 Synchronization

You can select a synchronization signal to synchronize the cascaded devices.
Step 1 Rotate the knob to select Synchronization and press the knob to enter the
submenu.
Step 2 Rotate the knob to set the synchronization status and source respectively.


Note：
When the input source resolution is changed or the input source cable is replugged,
you need to re-set the function. Please turn off the function and turn it on again.
www.novastar.tech
Figure 5-23 shows the application for this function.
Set as Primary: The target Ethernet port on the home screen is highlighted. For
example, .
Set as Backup: The target Ethernet port on the home screen is highlighted and
displayed with a small triangle icon at the bottom right. For example,
Status: Turn on or turn off this function. It is off by default.
Source: Select the target input source.
5 Menu Operations
.
27