Wiring and Fitting
Caution
!
Do not look directly into the opening of the transmission diodes.
The light beam that comes out could damage your eyes.
PROFIBUS-DP
(fiber-optic cable)
Supply voltage
(1L+, 2L+, 1M, 2M)
Figure 5-13
5.5
Inserting and identifying the electronic modules
Features
• The electronic modules are inserted in the terminal modules.
• A labeling strip allows you to identify the electronic modules.
• Electronic modules are:
– Self-coding
– Type-coded
The first time you insert an electronic module, a code element engages on the
terminal module. This mechanically prevents the wrong electronic module from
being inserted.
Requirements
Adhere to the rules below for inserting electronic modules. See Section 3.5 (The
electronic modules you can use on the various terminal modules).
5-24
Labeling strip
ET 200S
Wiring the IM151-1 FO STANDARD
Transmitter
1
Receiver
Simplex connector
ET 200S Distributed I/O System
Handle
2
EWA-4NEB780602402-09