Siemens SIMATIC ET 200S Manual page 515

RESERVE Modules
Order number
6ES7138-4AA00-0AA0 (installation width 15 mm)
6ES7138-4AA10-0AA0 (installation width 30 mm)
Features
The RESERVE module has the following characteristic features:
• Suitable for all TM-E terminal modules (installation widths 15 mm and 30 mm)
• Reserves a slot for any electronic module slot. Insert the RESERVE module in
the reserved slot of the ET 200S configuration.
Note
The following applies with the IM 151 (6ES7151-1AA01-0AB0,
•
6ES7151-1AA02-0AB0), IM 151 FO (6ES7151-1AB00-0AB0,
6ES7151-1AB01-0AB0) and IM 151/ CPU (6ES7151-7AA00-0AB0):
If you remove an electronic module from the ET 200S during operation and
insert a RESERVE module in its place, you must then switch the supply voltage
to the interface module OFF and ON.
Note with the IM 151 (6ES7151-1AA00-0AB0):
•
The RESERVE module cannot be used in the ET 200S.
Parameter assignment (without option handling)
• In STEP 7 or COM PROFIBUS, parameterize the electronic module you want
to use for future applications, such as 4DI DC High Feature on the slot of the
RESERVE module.
– Drag the module to the configuration table
– Set the parameters
ET 200S Distributed I/O System
EWA-4NEB780602402-09
15
15-1