Wiring - Siemens SIMATIC S7-1500 Manual

Wiring

The section below includes the block diagram of the module and various wiring options.
For more information on front connector wiring and creating cable shields, for example, refer
to the "Wiring" section in the S7-1500 Automation System
(http://support.automation.siemens.com/WW/view/en/59191792) and ET 200MP Distributed
I/O System (http://support.automation.siemens.com/WW/view/en/59193214) system
manuals.
Note
You may use and combine the different wiring options for all channels.
Note
Do not insert the potential jumpers included with the front connector!
Abbreviations used
Meaning of the abbreviations used in the following figures:
U +/U
n
I +/I
n
U
Vn
L+
M
M
ANA
CHx
PWR
Analog Input Module AI 8xU/I HS (6ES7531-7NF10-0AB0)
Manual, 07/2014, A5E03484886-AC
- Voltage input channel n (voltage only)
n
- Current input channel n (current only)
n
Supply voltage at channel n for 2-wire transmitters (2WT)
Supply voltage connection
Ground connection
Reference potential of the analog circuit
Channel or display of the channel status
Display for the supply voltage
3
11