Siemens SIMATIC ET 200S Manual page 80

Configuration Options
Prerequisites
For option handling you require:
• IM 151-1 STANDARD (6ES7151-1AA03-0AB0) or IM 151-1 FO STANDARD
interface module (6ES7151-1AB02-0AB0)
• To configure the DDB file:
– IM 151-1 STANDARD: SI02806A.GSx as of 07/2003 (as of V1.0)
– IM 151-1 FO STANDARD: SI02806B.GSx as of 07/2003 (as of V1.0)
Note
You do not require a DDB file for option handling in STEP 7:
as of STEP 7 V5.2 Service Pack 1 and
•
the current HW update for the interface and power modules Integrate the HW
•
update in HWCONFIG using the Options > Install HW Updates menu
command. You can download the HW updates from Customer Support on the
Internet.
You can find the description of option handling in the STEP 7 help system.
• At least one PM E 24–48 VDC or PM E 24–48 VDC/24–230 VAC power module
must be present in the configuration.
• RESERVE modules as replacements for future electronic modules
3-34
ET 200S Distributed I/O System
EWA-4NEB780602402-09