Installing The Shield Contact - Siemens SIMATIC ET 200S Manual

4.6

Installing the shield contact

Features
• You need the shield contact to connect cable shields (for example, analog
electronic modules, 1Count 24V/100kHz electronic module and 1SSI electronic
module).
• You fit the shield contact on the terminal module.
• The shield contact consists of a shield contact element, a conductor rail,
(3 x 10 mm), a shield terminal, and a ground connection terminal.
Requirements
• The terminal modules must be installed.
Tool required
• 3-mm screwdriver
• Metal-cutting saw
ET 200S Distributed I/O System
EWA-4NEB780602402-09
Installation
4-11