Structure Of The Manufacturer Id (Bytes 4, 5) - Siemens SIMATIC ET 200S Manual

Commissioning and Diagnostics
6.6.4 Master PROFIBUS address
Definition
The master PROFIBUS address diagnostic byte contains the PROFIBUS address
of the DP master that:
• Assigned parameters to the DP slave and
• Has read and write access to the DP slave
The master PROFIBUS address is in byte 3 of the slave diagnosis.
6.6.5 Manufacturer ID
Definition
The manufacturer ID contains a code that describes the type of the DP slave.
Manufacturer ID
Table 6-12 Structure of the manufacturer ID (Bytes 4, 5)
Byte 4
80
H
80
H
80
H
80
H
6-34
Byte 5
F3 ET 200S with IM151-1 BASIC
H
6A ET 200S with IM151-1 STANDARD
H
6B ET 200S with IM151-1 FO STANDARD
H
E0 ET 200S with IM151-1 HIGH FEATURE
H
Manufacturer ID for
ET 200S Distributed I/O System
EWA-4NEB780602402-09