Analog Electronic Modules
Technical specifications
Dimensions and weight
Dimensions
W H D (mm)
Weight
Data for specific modules
Supports clocked operation
Number of outputs
Length of cable
•
Shielded
Voltages, currents, potentials
Rated load voltage L+ (from
the power module)
•
Reverse polarity
protection
Isolation
•
Between the channels
and backplane bus
•
Between the channels
and load voltage
•
Between the channels
Permissible potential diffe-
rence
•
Between M
and the
ANA
central grounding point
(U
)
ISO
Insulation tested
Current consumption
•
From the power supply
L+
Power dissipation of the
module
Status, Interrupts, Diagnostics
Diagnostic functions
•
Group error
•
Diagnostic functions
readable
Analog value generation
Resolution (including over-
range)
Cycle time
13-108
15 x 81 x 52
Approx. 40 g
No
2
Max. 200 m
24 VDC
Yes
Yes
Yes
No
75 VDC/60 VAC
500 VDC
Max. 150 mA
Max. 2 W
Red "SF" LED
Yes
20 mA/13 bits +
$
sign
4 to 20 mA/13 bits
Max. 1.5 ms
Settling time
•
For resistive load
•
For capacitive load
•
For inductive load
Substitute values can be
applied
Suppression of interference, limits of error
Crosstalk between the out-
puts
Operational limit (in the en-
tire temperature range, with
reference to the output
range)
Basic error limit (operational
limit at 25 _C with reference
to output range)
Temperature error (with re-
ference to the output range)
Linearity error (with refe-
rence to the output range)
Repeatability
(in steady state at 25 _C
with reference to output
range)
Output ripple (with refe-
rence to output range,
bandwidth 0 to 50 kHz)
Data for selecting an actuator
Output range (rated value)
Load resistance
•
For inductive load
•
No-load voltage
Destruction limit against
voltages/currents applied
from outside
•
Voltage at the outputs to
M
ANA
•
Current
Connection of actuators
•
Two-conductor
connection
•
Four-conductor
connection
ET 200S Distributed I/O System
0.1 ms
0.5 ms
0.5 ms
Yes
min. –40dB
"0.5%
"0.3%
"0.01%/K
"0.02%
"0.05%
"0.02%
"20 mA
4 to 20 mA
Max. 500 W
1 mH
18 V
Max. 15 V
continuous; 75 V for
max. 1 s (pulse duty
factor 1:20)
Max. DC 50 mA
Yes
No
EWA-4NEB780602402-09