Siemens SIMATIC ET 200S Manual page 516

RESERVE Modules
• Parameterize the interface module as follows:
Operation at Preset <> Actual
Configuration
• If you have parameterized an electronic module with inputs for the RESERVE
module, the following substitute values are reported:
– Digital input modules: 0
– Analog input modules: 7FFF
– Function module: 0
Note
If you use RESERVE modules:
The SF LED lights up on the interface module
•
A channel-specific diagnosis and module status "10
•
RESERVE module slot.
You can find out about functionality and parameter assignment with option handling
in Section 3.8.
Terminal assignment
The RESERVE module has no connection to the terminals of the TM-E terminal
module. This enables you to fully wire the TM-E terminal module and prepare it for
the subsequent application.
Technical specifications
Dimensions and weight
Dimensions
W H D (mm)
Weight
Voltages, currents, potentials
Power dissipation of the
module
15-2
Parameters
15 81 52
30 81 52
Approx. 33 g
(installation width
15 mm)
Approx. 55 g
(installation width
30 mm)
Typ. 0.025 W
Setting
Enable
H
Status, interrupts, diagnostics
Status display
Diagnostic functions
: Wrong module" for the
B
No
No
ET 200S Distributed I/O System
EWA-4NEB780602402-09