Specifications; Technical Specifications; Table 4 Tbv Technical Specification - JCM GLOBAL TBV Series Integration Manual

2 SPECIFICATIONS

Technical Specifications

Acceptance Rate:
Bill Types Accepted:
*
Barcode Coupon :
Batch
Insertion Direction:
†
Processing Speed :
Validation Method:
Diagnostic Indicators:
Escrow:
Anti-stringing Mechanism:
Interface:
*. Refer to the specific "Bar Code Coupon Specification" Sheet for more details.
†. The time between the first Banknote insertion to the next Banknote sequential insertion operation.
‡. The Barcode Coupon Reading Specification can be changed by DIP Switch Settings.
P/N 960-100925R_Rev. A {EDP #186705}
Transaction Based Validator Integration Guide

Table 4 TBV Technical Specification

98% or greater
Note: The following banknote types are excluded:
a) Worn, dirty wet, stained, torn or excessively wrinkled Banknotes
b) Double (dual) Banknotes
c) Banknotes adhering Oil or Iron powder
d) Banknotes having folded corners or edges
e) Banknotes with excessive or inadequate magnetism or unclear graphics
f) Banknotes having the wrong cut dimensions or a printing displacement
g) Banknotes having excessive fold lines or specific Banknote processing
machine markings.
Long side: 110-170mm (4.33-6.69 in.)
Short side: 60-85mm (2.36-3.35 in.)
Standard Specification
a) Read code interleaved: 2 of 5
b) Narrow Bar: 0.5mm-0.6mm (0.019-0.023 in.)
c) Wide Bar/Narrow Bar = 3:1
d) Characters: 18 Characters
e) Print Position: Middle (Divide a Coupon equally on the left, right, top and
bottom of the Coupon's center)
f) Print Width: Wider than 10mm (0.39 in.)
Up to 50 Notes
Banknote: Four-way
Barcode Coupon: Two-way (Only with Surface facing upward)
Fixed Type:
• Banknote
–
Approximately 1.3 seconds/note from Banknote insertion to Escrow.
– Approximately 1.7 seconds/note between the first and next Banknote insertion 
during a sequential insertion operation.
• Barcode Coupon/Double Read
–
Approximately 3.0 seconds/note from Banknote insertion to Escrow.
–
Approximately 3.7 seconds/note between the next Banknote insertion during a
sequential insertion operation.
• Barcode Coupon/Single Read
–
Approximately 1.3 seconds/note from Banknote insertion to Escrow.
–
Approximately 2.0 seconds/note between the next Banknote insertion during a
sequential insertion operation.
Centering Model:
• Banknote
–
Approximately 1.6 seconds/note from Banknote insertion to Escrow.
–
Approximately 2.0 seconds/note between the next Banknote insertion during a
sequential insertion operation.
• Barcode Coupon/Double Read
–
Approximately 3.5 seconds/note from Banknote insertion to Escrow.
–
Approximately 4.2 seconds/note between the next Banknote insertion during a
sequential insertion operation.
• Bar-code Coupon/Single Read
–
Approximately 1.6 seconds/note from Banknote insertion to Escrow.
–
Approximately 2.3 seconds/note between the next Banknote insertion during a
sequential insertion operation.
Optical (6 Illumination, [Transmissive/Reflective]) and Magnetic
LED Full Color
1 Note
Optical Sensor & Pusher Mechanism
Photo-Coupler Isolation, RC232C, ccTalk, USB (Full Speed)
5
‡
‡
‡
‡
© 2010, Japan CashMachine Co, Limited