JCM GLOBAL TBV Series Integration Manual page 31

On-line Off-line
LED Color LED Color
(Flash (Flash
Sequence) Sequence)
Red Red
(3) (3)
Red Red
(4) (4)
Red Red
(5) (5)
Red Red
(6) (6)
Red Red
(7) (7)
Red Red
(8) (8)
Red Red
(9) (9)
Red Red
(10) (10)
Red Red
(11) (11)
Red Red
(12) (12)
Red Red
(13) (13)
P/N 960-100925R_Rev. A {EDP #186705}
Transaction Based Validator Integration Guide
Table 21 Standard LED Error Codes (Continued)
Error
While operating the Stack Motor, no pulse inputs exist greater than the rated value.
[Solution] Check that the following parts are properly assembled and/or Harness
Stack Motor
connected. Clean or adjust the following parts and Sensors.
Lock-up Problem
[Relative Parts] Stack Motor, Stack Motor Encoder, Pusher Mechanism, Pusher
Plate.
If the error is not resolved, change the above related part or parts.
While the Centering Motor is operating, no pulse inputs exist greater than the rated
value.
[Solution] Check that the following parts are properly assembled and/or Harness
Centering Motor
connected. Clean or adjust the following parts and Sensors.
Lock-up Problem
[Relative Parts] Centering Motor, Centering Guide, Centering Home Sensor.
If the error is not resolved, change the above related part or parts.
While operating the BNF Section, no pulse inputs exist greater than the rated value.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
BNF Unit Problem
[Relative Parts] BNF Feed Motor, Banknote Press Motor.
If the error is not resolved, change the above related part or parts.
While the Shutter Motor is operating, Sensors detect abnormal movement.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
Shutter Error
[Relative Parts] Shutter Motor, Shutter Sensor
If the error is not resolved, change the above related part or parts.
The Pusher Mechanism Home Position Sensor detects that the Pusher Mechanism
has not moved to the Home end position.
Banknote Jam
[Solution] Check that the following parts are properly assembled and/or Harness
at the Pusher
connected. Clean or adjust the following parts and Sensors.
Mechanism
[Relative Parts] Pusher Mechanism, Stack Motor, Stack Home Sensor, Stack Motor
Home Position
Encoder.
If the error is not resolved, change the above related part or parts.
When stacking Banknotes, the Pusher Mechanism is not returning to the Home end
position.
Pusher Mechanism [Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
Home Position
Problem
[Relative Parts] Pusher Mechanism, Stack Motor, Stack Home Position Sensor,
Stack Encoder Sensor.
If the error is not resolved, change the above related part or parts.
The Pusher Mechanism is not returning to the Pusher Mechanism Half-way
Position.
Pusher Mechanism
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
Half-way Position
Problem
[Relative Parts] Pusher Mechanism, Stack Motor, Pusher Mechanism Half Sensor,
Stack Motor Encoder
If the error is not resolved, change the above related part or parts.
The Centering Mechanism is not presently seated at its Home end position.
[Solution] Check that the following parts are properly assembled and/or Harness
Centering Home
connected. Clean or adjust the following parts and Sensors.
Position Problem
[Relative Parts] Centering Motor, Centering Guide, Centering Home Sensor
If the error is not resolved, change the above related part or parts.
While Initializing, no pulse inputs exist greater than the rated value.
[Solution] Check that the following parts are properly assembled and/or Harness
Feed Motor Speed
connected. Clean or adjust the following parts and Sensors.
Problem
[Relative Parts] Feed Motor, Feed Motor Encoder.
If the error is not resolved, change the above related part or parts.
While the BNF is communicating, no communication data exists that is longer than
the expected rated time.
BNF Section
[Solution] Check that the following parts are properly assembled and/or Harness
Communication
connected. Clean or adjust the following parts and Sensors.
Error
[Relative Parts] BNF Communication Harness.
If the error is not resolved, change the above related part or parts.
While the ICB is communicating, no communication data exists that is longer than
the expected rated time.
ICB
[Solution] Check that the following parts are properly assembled and/or Harness
Communication
connected. Clean or adjust the following parts and Sensors.
Error
[Relative Parts] ICB Board.
If the error is not resolved, change the above related part or parts.
Causes and Solutions
© 2010, Japan CashMachine Co, Limited
2 3