Transaction Based Validator
1 GENERAL INFORMATION
Description
This section provides a general overview of the
Transaction Based Validator Unit (TBV) pictured
in Figure 1. This first section is designed to help
navigation through this guide with ease and
provides the following information:
• TBV Unit
• Component Names
• Primary Features
• Model Description
• Precautions
• Specifications
• Installation
• Connector Pin Assignments
• Preventive Maintenance
• Operational Flowchart.
• Standard Interface Circuit Schematics
TBV Unit
P/N 960-100925R_Rev. A {EDP #186705}
TBV™ Series
Integration Guide
R e v i s i o n A
Figure 1 Transaction Based Validator Unit (TBV)
1
• LED Diagnostics
• Unit Dimensions
• International Compliance
• Contact Information.
In order to make operation of this device easier and
make navigation within this manual simpler, the
following illustrations were used within the text:
• Safety Instructions, which need to be
observed in order to protect the operators and
equipment, have been written in bold text and
have been given the pictographs:
• Special Notes, which effect the use of the
Banknote Acceptor, have been written in italic
text and have been given the pictograph:
• Steps, requiring the operator to perform
specific actions are given sequential numbers
(1., 2., 3., etc).
© 2010, Japan CashMachine Co, Limited