Taylor C708 Operator's Manual page 32

USER INTERFACE
DST END WEEK
> First Sunday
Second Sunday
Third Sunday
Pressing the SEL key with the arrow by the
appropriate week will select that setting and return to
the Manager's Menu.
Auto Heat Time—The AUTO HEAT TIME screen
allows the manager to set the time of day at which
the Heat Treatment Cycle will start.
AUTO HEAT TIME
Change
> Exit
To set AUTO HEAT TIME, press the Up Arrow key to
move the arrow to Change. Then press the SEL key.
The screen will display the time with the cursor under
the hour position.
5
AUTO HEAT TIME
Press the arrow keys to increase or decrease the
hour to the desired setting. Then move the cursor to
the minutes position by pressing the SEL key. Adjust
the setting for minutes. Then press the SEL key to
save the setting and return to the AUTO HEAT TIME
screen. Press the SEL key to exit the screen and
return to the Manager's Menu.
Auto Start Time—The AUTO START TIME screen
allows the manager to set the time of day at which
the machine automatically enters the Auto mode
from the Standby mode. The machine must be in the
Standby mode without a freezer lock condition in
order to Auto start at the programmable time. The
Auto Start Time can also be disabled and require
starting the Auto mode manually.
AUTO START TIME
Enable
> Disable
5-10
00:00
00:00
DISABLED
Enable AUTO START TIME by pressing the Up
Arrow key to move the arrow up to Enable. Press the
SEL key to advance to the next screen.
Change
> Exit
Program AUTO START TIME by pressing the Up
Arrow key to move the arrow to Change. Press the
SEL key to advance to the next screen.
Use the arrow keys to program the AUTO START
TIME by increasing or decreasing the hour setting
above the cursor. Press the SEL key to advance the
cursor and program the minutes. Press the SEL key
to return to the previous screen with the new time
setting displayed. Press the SEL key to exit the
screen and return to the Manager's Menu.
Auto Standby Time—The AUTO STANDBY TIME
screen allows the manager to set the time of day at
which the machine automatically enters the Standby
mode from the Auto mode. This saves power during
slow sales. By default, this feature is disabled.
Enable the AUTO STANDBY TIME by pressing the
Up Arrow key to move the arrow up to Enable. Press
the SEL key to advance to the next screen.
> Enable
Disable
Program AUTO STANDBY TIME by pressing the Up
Arrow key to move the arrow to Change. Press the
SEL key to advance to the next screen.
Change
> Exit
Models C708 & C716
AUTO START TIME
00:00
AUTO START TIME
00:00
AUTO STANDBY TIME
DISABLED
AUTO STANDBY TIME
00:00
User Interface