Taylor C708 Operator's Manual page 30

USER INTERFACE
Note: The machine will continue operation in the mode
it was in when the Manager's Menu was selected.
However, the control keys will not be lit and are
nonfunctional when the Manager's Menu is displayed.
The control keys are functional in the Manager's Menu
when the CURRENT CONDITIONS screen is displayed.
(See Current Conditions on page 5-15.)
Entering Access Code
With the ENTER ACCESS CODE screen on the display,
use the SEL key to set the first code number in the cursor
position. When the correct number is selected, press the
SEL key to move the cursor to the next number position.
ENTER ACCESS CODE
8
__
Continue to enter the proper access code numbers
(8309) until all four numbers are displayed, then press
the SEL key. The Manager's Menu will display on the
5
screen, provided the correct access code is entered.
If an incorrect number is entered for the access code, the
display will exit the Manager's Menu program when the
SEL key is pressed.
5-8

3 0 9
Figure 5-4
Manager's Menu Options

Press the arrow keys to move up or down through the
Menu. Select a menu option by pressing the SEL key.
Exit the Manager's Menu by selecting EXIT FROM
MENU or press the Cone key.
The following menu options are listed in the Manager's
Menu:
• EXIT FROM MENU
• SERVINGS COUNTER
• SET CLOCK
• AUTO HEAT TIME
• AUTO START TIME
• AUTO STANDBY TIME
• AGITATOR OPERATION
• MIX LEVEL AUDIBLE
• FAULT DESCRIPTION
• FAULT HISTORY
• LOCKOUT HISTORY
• HEAT CYCLE SUMMARY
• HEAT CYCLE DATA
• SYSTEM INFORMATION
• CURRENT CONDITIONS
• ENABLE WIFI
Exit From Menu—Select EXIT FROM MENU to exit
the Manager's Menu and return the control panel
13399
keys to normal operation.
Servings Counter—The SERVINGS COUNTER
screen is used to check or reset the number of
servings dispensed from the machine. The servings
counter will automatically reset to zero when the
machine is brush-cleaned.
Draws
> Next
Reset the SERVINGS COUNTER by pressing the
Select key to advance to the next screen. Press the
Up Arrow key to move the arrow (>) to Yes and press
the SEL key. The servings counter will reset to zero
and exit back to the Manager's Menu.
Models C708 & C716
SERVINGS COUNTER
0
User Interface