Contents - ABB ACQ800 Series Hardware Manual

20

Contents

The chapters of this manual are briefly described below.
Safety instructions
operation and maintenance of the drive.
About this manual
The ACQ800-37
Mechanical installation
Planning the electrical installation
protective functions of the drive, and cable routing.
Electrical installation
Motor control and I/O board (RMIO)
control and I/O board and its specifications.
Installation checklist and start-up
installation of the drive.
Maintenance
Fault tracing
Technical data
sizes and technical requirements, provisions for fulfilling the requirements for CE
and other markings and warranty policy.
Dimensions
About this manual
gives safety instructions for the installation, commissioning,
introduces this manual.
describes the drive.
instructs how to move, place and mount the drive.
describes the cabling and wiring of the drive.
helps in checking the mechanical and electrical
contains preventive maintenance instructions.
contains troubleshooting instructions.
contains the technical specifications of the drive, e.g. ratings, frame
contains information on the dimensions of the drive.
provides advice on motor and cable selection, the
shows external control connections to the motor
ACQ800-37 Hardware Manual