Table of Contents
Advertisement
90
ACQ800-37-specific parameters in the inverter control program
The actual signals and parameters described in this section are included in the most
commonly used inverter control program, ACQ800 Pump Control Program.
Terms and abbreviations
Term
Actual signal
FbEq
Parameter
Installation checklist and start-up
Definition
Signal measured or calculated by the drive. Can be monitored by the
user. No user setting possible.
Fieldbus equivalent: The scaling between the value shown on the control
panel and the integer used in serial communication.
A user-adjustable operation instruction of the drive.
ACQ800-37 Hardware Manual
Advertisement
Table of Contents
