Contents Of This Manual - ABB PCS6000 Service Manual

1.3. Contents of this manual

– Chapter 2, Important safety information, page 23 explains the various safety
instruction levels and provides general instructions on safety, which need to be strictly
observed.
– Chapter 3, Service tools, page 31 introduces the special tools used for service work as
described in this document.
– Chapter 4, Preventive maintenance, page 47 contains an overview about periodically
required preventive maintenance tasks to ensure reliable operation.
– Chapter 5, De-energizing, grounding and start-up, page 69 provides instructions on
how to shut-down the PCS6000 for service purposes and on how to start-up again after
the work is done.
– Chapter 6, Troubleshooting, page 73 provides instructions on how to proceed when
encountering a problem with the PCS6000.
– Chapter 7, Checking control components, page 81 provides instructions on checking
the electronic devices of the PCS6000 and an overview on the meaning of LEDs of the
main circuit boards and I/O devices.
– Chapter 8, Replacing control components, page 85 provides instructions on how to
replace defective control components.
– Chapter 9, Checking diodes, IGCTs and IPS, page 115 provides instructions on how to
check power semiconductors and IPS.
– Chapter 10, Replacing power and cooling components, page 133 provides instructions
on how to repair defective parts.
ABB is constantly striving for the best product and service offerings for our customers.
Therefore ABB appreciates your valuable feedback or suggestions for improvements of
PCS6000 products.
PRODUCT
PCS6000
DOCUMENT KIND
Service manual
DOCUMENT ID.
3BHS600000 E80
ABOUT THIS MANUAL
REV. LANG. PAGE
F en 18/272