ACQ800-37 Hardware Manual
Dimensions
What this chapter contains
This chapter contains tables of cabinet line-ups as well as dimensional drawings of
the different frame sizes of the ACQ800-37.
Cabinet line-ups
The drive consists of cubicles built into a cabinet line-up. The tables below show the
composition of cabinet line-ups for each frame size and the standard combinations
of options. The dimensions are in millimeters.
Notes:
• The side panels increase the total line-up width by 30 mm (1.2 in).
• The standard depth of the cabinet line-up is 650 mm (25.6 in) (excluding door
equipment such as switches and air inlet gratings). This is increased by 130 mm
(5.1 in) with top entry/exit models as well as units with cooling air intake through
the bottom of the cabinet.
• The measurements given apply to 6-pulse-input, non-UL/CSA units. For
dimensions of 12-pulse-input or UL/CSA units, contact your local ABB
representative.
The tables are followed by example dimensional drawings.
R6
R7i
R8i
Input/Output
cubicle
Drive
Line-up width
mm (in)
400
400 (15.75)
Drive
Line-up width
mm (in)
600
600 (23.62)
Supply and
inverter unit
cubicle
mm (in)
400
800 (31.50)
Approx. net weight
kg (lb)
300 (660)
Approx. net weight
kg (lb)
400 (880)
Line-up width
Approx. net weight
mm (in)
kg (lb)
1200 (47.24)
950 (2100)
127
Dimensions