Sensor Unit-To-Tubing Connection Guidelines; Machining The Female Connector (For Reference Purpose) - Oval ALTI mass Series Instructions Manual

L-770HP--E
5.4 Installation Instructions
This equipment (sensor unit) is connected to the
piping with high pressure cone & thread fitting, /"
dia. C. (Connection examples are shown in Figs
. and ..)
Connector: High pressure cone & thread connection,
/" dia. C (male thread  ・ / - UNF)
Set the collar so that the groove faces out.
M Hex Soc. Hd. Bolts
Fig. .
5.5 Sensor Unit-to-Piping Connection Guidelines
5.5.1 Machining the Female Connector (for reference)
Fig. . is a machining drawing for preparing the high pressure cone & thread connection, female
connector. See also Fig. . "Detail Drawing of Connectors".
Fig. . Processing diagram on female side of high-pressure cone and thread connection (example)

Connector
Clamp
/−UNF LH
Gland Nut
Collar
φ. max must
be kept strictly.
Weep Hole φ.
( places)
Sensor Unit (body)
Sensor Unit (connector)
Piping (Connectors)
Piping
Fig. .
To the Meter
(Sensor Unit)