YUNEEC H920 PLUS User Manual page 37

Button A = Take Still Photo
Button B = Start/Stop Recording Video
GIMBAL CAMERA PAN CONTROL
The gimbal pan mode switch on ST16 (S2) enables the Follow Mode. When the switch
position is UP, the gimbal camera is in Follow Mode. The pan control of the gimbal
camera is disabled when the switch position is UP. The gimbal camera will adjust its
pan direction per the aircraft's movements.
When the switch is in the middle position, the gimbal camera is in Follow Pan
Controllable Mode, the gimbal camera will adjust its pan direction per the aircraft's
movements. Use the Pan Control Knob to set the pan position of the gimbal camera.
When the switch position is down, the gimbal camera is in Global Mode. The pan
direction of the gimbal camera will be fixed regardless of the aircraft's movements.
Use the Pan Control Knob to set the pan position of the gimbal camera.
Any information above might be changed due to the software update. For
the latest documents, please check the official website.
36