YUNEEC H920 PLUS User Manual page 21

TAKE OFF
When there is suitable GPS signal for both the aircraft and ST16, and
the aircraft is in Angle or Smart (chosen 'Follow') mode, the function
of taking off the aircraft by one slide can be activated with the aircraft
TAKEOFF
flat on the ground.
STEP 1) Press TASK/CAMERA, select TAKE OFF;
STEP 2) Slide the sliding block from left to right, the aircraft will climb vertically and
begin to hover until it reaches about 6.6 feet high.
Model: H920 Plus
VOLTS
N/A
GPS
N/A
SAT
N/AE
N/AN
POS
N/AV
ALT
N/Am
G-SPD
N/A KPH
DIS
N/Am
Pad
NOTICE: When the aircraft is in Home mode, the TAKE OFF function won't be
activated; When the aircraft is in Angle or Smart (chosen 'Follow') mode, the TAKE
OFF function won't be activated if the distance between the pilot and aircraft is less
than 16.4 feet.
Connecting drone...
welcome,Pilot
WAYPOINT
System Settings
H:N/A V.S:N/A H.S:N/A
TAKEOFF
Channel Settings
D:N/A
20
12:27 AM 12
G
ANGLE
OBS
Disabled
GPS
CALIBRATION
FOLLOW
WATCH
TASK
CAMERA
Model Select