YUNEEC H920 PLUS User Manual page 29

GEO-FENCE FUNCTION
The geo-fence is a user-determined, virtual barrier that will keep the aircraft flying
within a selected area. If inertia causes the H920 to fly beyond the geo-fence, it will
automatically return to a point within the fence area. The Geo-fence may be
enabled:
Connecting drone...
Select the fence icon [
There are square, circle and triangle fences by default. Select a shape, tap the
screen, and a geo-fence of corresponding shape will display on the map.
Tap the screen at the center of the desired geo-fence. Press and hold the central
blue point indicator, and the entire fence may be moved. Slide the right sliding
block, and the proportion of the fence may be changed.
Select the [ ] icon and a custom-shape geo-fence may be set. Touch all desired
on the map, and the system will automatically link them to form the geo-fence.
NOTICE: Currently, 20 points are limited to a maximum of 20 points. All points
should be set in order.
NOTICE: When using a default geo-fence, press and hold any vertex to adjust its
shape.
After setting/creating the geo-fence, switch to Angle mode. Press start, and then
slide the sliding block. The geo-fence function is now activated.
NOTICE: If the H920 PLUS launches/takes off outside of the geo-fence after the
geo-fence function is activated, once flown inside the geo-fence, it won't fly beyond
the pre-set fence line.
NOTICE: Ensure that geo-fence lines do not cross; otherwise the fence point will not
be successfully recorded.
Select the icon [
Select the icon [
NOTICE:The geo-fence function may only be activated by tapping the screen and
sliding the slider. There is no pause for geo-fence function.
H:N/A V.S:N/A H.S:N/A
], and the task setting column will appear.
] to delete the geo-fence.
] to set the altitude of geo-fence.
D:N/A
28