Led Status Indication - YUNEEC H920 PLUS User Manual

LED STATUS INDICATIONS DURING STARTUP
- The Aircraft is in "Bind"Mode
Blinks orange very rapidly (10 times per second)
- The Aircraft is in a No-Fly Zone *
Flashes red and white rapidly (5 times per second)
Please see the instruction manual for more
information regarding no-fly zones
LED STATUS INDICATIONS BEFORE/DURING FLIGHT
- The Aircraft is in Angle Mode without GPS lock
Blinks purple (3 times per second) then off
(for 1 second)
- The Aircraft is in Angle Mode with GPS lock
Glows solid purple
- The Aircraft is in Home Mode
Blinks red rapidly (5 times per second)
- Second Level low Voltage Battery Warning
Flashes red,green and blue continuously
- ST16 with GPS lock
Blinks white every three seconds
LED STATUS INDICATIONS FOR CALIBRATION MODES
- Compass Calibration Mode Entered
Blinks red and green slowly (2 times per second)
- Accelerometer Calibration Mode Entered
Blinks red, green and blue slowly(1 time per second)
- Calibration failed
Glows solid white

LED STATUS INDICATION

- Initialization failed
Pulses red (3 times per second)
- The Aircraft is in Smart Mode without GPS lock
Blinks green (3 times per second) then off
(for 1 second)
- The Aircraft is in Smart Mode with GPS lock
Glows solid green
- First Level low Voltage Battery Warning
Flashes red,green and blue every 3 seconds
- GPS Disabled
Flashes purple(1 flash per second)
- Enter Task function
Blink green and purple slowly (1 time per second)
- Compass Calibration Started
Blinks red and green rapidly (5 times per second)
- Accelerometer Calibration Mode Started
Blinks red, green and blue rapidly (3 times per second)
31