YUNEEC H920 PLUS User Manual page 18

Table of Contents

Advertisement

Model: H920 Plus
VOLTS
CCC
N/A
PONINT 1
PONINT 1
PONINT 2
GPS
PONINT 3
N/A
INSTRUCTION
SAT
N/AE
RESET: Delete all waypoints
N/AN
+/-: Add/Delete a waypoint
POS
LIST: Load existing waypoint
N/AV
SAVE: Save waypoint
ALT
START: Start waypoint mission
N/Am
G-SPD
N/A KPH
BACK
DIS
N/Am
Pad
Tap the CCC to enter the Curve Cable Cam function.
BACK
RESET
BACK: Tap BACK to return to the previous interface.
RESET: Tap RESET to delete all the points created during the flight.
: Tap '-' to delete the last point created during the flight.
: Tap '+' to create a new point recording the current flying position.
LIST: Tap LIST and all previous missions/routes saved will be shown on a
list. Delete any saved mission/route by sliding the chosen one to the
left.
SAVE: Tap SAVE and the current mission/route will be saved.
START: Tap START, and slide the icon. H920 PLUS will fly back to
waypoint 1 automatically.
[ ]: When the pilot tap the [
function will be paused. When tapped again, the [ ] will become [ ], the
copter will continue the CCC function. Exit the function by tapping EXIT
icon or switching flight mode.
If the pilot set 7 waypoints as shown, when the copter arrives at the Waypoint 1, slowly raise
the throttle stick, the copter will fly along the waypoints from 1 to 7 in order. If the pilot slowly
lower the throttle stick, the copter will fly along the waypoints from 7 to 1 in order.
JOUR: The Journey function enables the H920 PLUS to capture perfect aerial self-shots, or a fly
to/from scenic shot with perfect motion. When enabled, the H920 will fly away, up, and return.
Tap JOUR to enter the journey function.
START: Select JOUR and set the distance, then slide the slider. H920 PLUS will fly up and out to
take a photo or video.
BACK: Tap BACK to return to the previous interface.
welcome,Pilot
Make sure the H920 Plus is clear of all
obstacles before starting mission.
SLIDE TO START
CANCEL
RESET
LIST
System Settings
Channel Settings
LIST
SAVE
START
], the icon will become [ ]and the CCC
3
2
1
17
12:27 AM
12
SAVE
START
Model Select
4
7
G
ANGLE
OBS
Disabled
GPS
CALIBRATION
FOLLOW
WATCH
TASK
CAMERA
5
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents