Assembling The H920 Plus - YUNEEC H920 PLUS User Manual

ASSEMBLING THE H920 Plus

INSTALLING THE MOTOR ARMS
Fold the motor arms upwards and secure them using the straight knurled nut cover
located on the motor arms.
NOTICE: Do not over tighten the straight knurled nuts; It may cause deformation of the
carbon-fiber arms.
INSTALLING THE MOTOR ARMS
INSTALLING THE PROPELLERS
IMPORTANT NOTE: Always ensure propellers are installed properly. The motors are
extremely powerful, and if the device is misused or propellers not properly secured, there
is a risk of material damage, serious injury and even fatal injury.
Mount the propellers on the motors properly and note the 'A' and 'B' printed on the
motor arms. This distinction between 'A' and 'B' refers to propeller 'A' and 'B'. Mount
propeller 'A' on motor 'A' and propeller 'B' on motor 'B'. Press and rotate the propeller
in the reverse direction the arrow indicates. When a click is heard, the propeller is
successfully secured. After securing the propeller, hold the motor housing with one hand
while attempting to turn the prop in both directions, to ensure and check for a complete
lock.
NOTICE: To remove the propeller, press and hold the center button on the propeller and
rotate the propeller in the direction the arrow indicates. The prop will rotate and can be
unlocked/removed.
11