Attaching Cgo4 Gimbal Camera To Multicopter - YUNEEC H920 PLUS User Manual

ATTACHING CGO4 GIMBAL CAMERA TO MULTICOPTER

NOTICE: Remove the fixed foam pad from the CG04 gimbal camera before proceeding.
STEP 1：First unscrew 4 screws to remove CGO4 from the Proaction. Insert the gimbal
connection cord to the inner side of gimbal damping plate (relative to the direction of
H920 Plus power connection port).
STEP 2：Mount the gimbal thumb screws and lock washers (4 pcs)
to the gimbal and rotate the screws until they're secured into the
gimbal damping plate.
NOTICE: The front of the gimbal should be installed in the direction
of the nose of H920 Plus.
NOTICE: Use the dedicated lock washers when rotating the screws.
STEP 3：Connect the gimbal power cord to H920 Plus gimbal connection
port.
30