YUNEEC H920 PLUS User Manual page 23

Connecting drone...
STEP 1) Power on the ST16, and then lock GPS signal (For a better connection, we
recommend you go outdoors).
STEP 2) Tap the setting icon [
[ ] and connect to available network.
STEP 3) The map will be downloaded automatically based on location.
NOTICE: The aircraft [
location by tapping the icon [
There are two displaying modes of Google map : Overlay/Normal and Satellite. Tap
the map icon [
NOTICE: Some areas are unable to display satellite maps due to map sampling/availability
from provider.
After the map is downloaded, tap the setting icon [
tap the Wi-Fi [
1234567890). Preparation work on the ground is now complete.
Connecting drone...
H:N/A V.S:N/A
] on the right top corner, then select Wi-Fi icon
] or the ST16 [
] on the screen.
] select the mode.
] again. Connect the ST16 to the Wi-Fi of CGO4 (Password is
H:N/A V.S:N/A
H.S:N/A D:N/A
Reset Guide
Map Select
] can be selected as the center of the
H.S:N/A D:N/A
22
Other Setting
Google Map
] on the right top corner, and