Alps Electric SPEEDGLIDER Operator's Manual page 55

AIR LOGIC POWER SYSTEMS (ALPS)
10. Setting Test Timers
11. Enter the CPM
12. Run a few containers
SPEEDGLIDER  ADVANCED OPERATOR MANUAL
A. The goal for setting test timers is to use as much time as allowed by the
CPM. This is because a longer test time will more likely detect a smaller
hole.
B. For now the test time entered do not matter
The machine speed along with the use of the Detail Timers menu will help
determined to the appropriate test times.
Enter the appropriate CPM. The CPM range for the SpeedGlider is 50 to
275.
Watch the "Spare Time At End" field. This will be the time we can use or add
to the current test time vaules.
54
CONTAINER CHANGE OVER
TM 2012-005 REV00 © 10/25/2012