Table of Contents
Advertisement
AIR LOGIC POWER SYSTEMS (ALPS)
5. Adjust VFD (if
TIMING SCREW VFD LED EXPLANATION
necessary)
may require replacement of motor and/or drive
Potentiometer Adjustments
SPEEDGLIDER ADVANCED OPERATOR MANUAL
Power LED: Indicates 220 or 120VAC is present.
Alarm LED: Indicates an alarm and will require a power cycle. Persistent alarms
Speed: Is not used no adjustment is necessary.
S/R: Acceleration: Set this so bottles accelerate
smoothly. Do not set excessively long. If the
SpeedGlider is not controlling conveyor speed it
very important to reduce this timer to a minimum.
S/S: Deceleration: Set this so bottles stop
smoothly. Do not set excessively long. If the
SpeedGlider is not controlling conveyor speed it
very important to reduce this timer to a minimum.
External/Internal selector switch
Switch must be in the "INT" position
51
CONTAINER CHANGE OVER
TM 2012-005 REV00 © 10/25/2012
Advertisement
Table of Contents
Need help?
Do you have a question about the SPEEDGLIDER and is the answer not in the manual?
Questions and answers