Create A New User Waypoint Defined By Latitude & Longitude - Garmin Beechcraft 200 Series Cockpit Reference Manual

6) Enter the departure time. Press the ENT Key when finished. Departure time
may be entered in local or UTC time, depending upon system settings.
7) Enter the fuel flow. Press the ENT Key when finished. Note that in 'AUTOMATIC'
page mode, fuel flow is provided by the system.
8) The flashing cursor moves to the fuel onboard field. Modify the fuel onboard.
Press the ENT Key when finished. In 'AUTOMATIC' mode, fuel onboard is
provided by the entry made on the Weight Planning Page.
9) The flashing cursor moves to the calibrated airspeed field. Enter a calibrated
airspeed. Press the ENT Key when finished.
Create a neW user Waypoint deFined By latitude & longitude
1) Turn the large FMS Knob on the Control Unit to select the 'WPT' page group.
2) Turn the small FMS Knob to select the User WPT Information Page.
3) Press the NEW Softkey. A waypoint is created at the current aircraft
position.
4) Enter the desired waypoint name.
5) Press the ENT Key.
6) The cursor is now in the 'WAYPOINT TYPE' field. If desired, the waypoint
can be made temporary (deleted automatically when the system is turned
off). If the waypoint is to remain in the system, proceed to step 7.
a) Turn the large FMS Knob one click to the left to highlight
'TEMPORARY'. This list is populated only when there is an active flight
plan.
b) Press the ENT Key to place a check-mark in the box.
7) The cursor is now in the 'WAYPOINT TYPE' field. Turn the small FMS Knob
to display a list waypoint types.
8) Turn the small FMS Knob to select LAT/LON (latitude and longitude).
9) Press the ENT Key.
190-00929-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
Flight planning
19