Powering On The Router - Huawei Quidway AR 28 Series Installation Manual

Quidway AR 28 Series Routers Installation Manual
Figure 5-5 Setting terminal type

5.1.2 Powering on the Router

I. Checking before power-on
Check according to the following items before powering on the router.
Whether the power cord and PGND wire are correctly connected.
Whether the voltage of the power supply complies with the requirement of the
router.
Whether the console cable is correctly connected, whether the PC or terminal for
configuration is open, and whether the settings are done.
Warning:
Before powering on the router, the user should be aware where the switch of the power
supply to the router is located, so that the power supply can be disconnected in time
once accidents occur.
II. Powering on the router
Turn on the site power.
Chapter 5 Startup and Configuration of the Router
Huawei Technologies Proprietary
5-4