Parametrizing With The Handheld - Festo CPX-FB13 Electronic Manual

2. Commissioning

2.2.3 Parametrizing with the handheld

2−32
Please note
Module parameters can refer to:
Properties of the complete module
Properties of an individual channel of a module
The handheld offers menu−orientated access to the parame
trizing of the CPX terminal without configuration software.
If the handheld has write access to the parameters, you can
no longer parametrize via the bus:
System parameters
Module parameters
Diagnostic memory parameters can still be parametrized via
the bus.
The value Use setting of CPX system" with the system para
meters for Faile safe or Force mode (see Fig. 2/10) means:
The value of these parameters will not be modified when the
field bus system is switched on. Values already set with the
handheld or via DPV1 are retained.
Information on operating the handheld can be found in the
manual for the handheld P.BE−CPX−MMI−1−.. .
Festo P.BE−CPX−FB13−EN en 0308a