Overview Of The Diagnostic Bytes - Festo CPX-FB13 Electronic Manual

3. Diagnosis

3.5.2 Overview of the diagnostic bytes

Standard diagnostic information
Byte Contents
0 Station status 1
1 Station status 2
2 Station status 3
3 Diag.Master_add
4 Ident_number high byte
5 Ident_number low byte
Tab. 3/8: Overview of diagnostic bytes: Standard diagnostic information
3−14
In order to commission your system, it may be useful in some
cases to switch off the device−related diagnosis. If your
controller does not start, try with the setting Device−related
diagnosis inactive" on the 8−element DIL switch (see section
1.2.2).
In the following the diagnostic bytes are represented in four
tables.
Explanation
See Tab. 3/12
See Tab. 3/13
See Tab. 3/14
Master address: The address of the master, which
parametrized the CPX terminal, is entered in this
byte.
Manufacturer identifier high byte (05
Manufacturer identifier low byte (9E
)
h
)
h
Festo P.BE−CPX−FB13−E N en 0308a