Connection Possibilities - Festo CPX-FB13 Electronic Manual

1. Installation

1.3.4 Connection possibilities

1−22
Please note
Use protective caps or blanking plugs to seal unused con
nections. In this way you will comply with protection class
IP65.
Connecting with field bus plugs from Festo
Observe the fitting instructions for the field bus plug.
·
Tighten the fastening screws at first by hand and then
with 0.4 Nm.
You can easily connect the CPX terminal to the field bus with
the field bus plug from Festo (type FBS−SUB−9−GS−DP−B, part
no. 532216). You can disconnect the plug from the node with
out interrupting the bus cable (T−tap function).
Please note
The clamp strap in the Festo field bus plug is connected
only capacitively internally with the metal housing of the
sub−D plug. This prevents equalizing currents from flowing
via the screening of the field bus cable.
Festo P.BE−CPX−FB13−EN en 0308a