1. Installation
1.3.5 Further connection possibilities for the field bus with adapters
1-24
Caution
Make sure the polarity is correct when you connect the
•
field bus interface and the power supply for the bus
interface.
Connect the screening/shield.
•
There are further possibilities of connecting the CPX terminal
with adapters. You can order these separately from Festo.
–
M12 adapter 5-pin (protection class IP65)
type: FBA-2-M12-5pol
–
Screw terminal adapter 5-pin (protection class IP20)
type: FBA-1-SL-5pol
M12 adapter
With this adapter connection to the bus is made with a 5-pin
M12 socket with PG9 screw connector. Use the second con-
nection socket for the continuation of the field bus.
Please note
Use blanking plugs to seal unused connections.
•
You will then comply with protection class IP65.
Order this connection from Festo (type FBA-2-M12-5pol).
en 0206NH
Festo P.BE-CPX-FB14-GB