Before You Begin; Cables You May Need To Order - Paradyne FrameSaver SLV 9128 Installation Instructions Manual

Before You Begin

Make sure you have:
A dedicated, grounded power outlet that is protected by a circuit breaker within
6 feet of the FrameSaver SLV (service level verifier) unit.
A clean, well-lit, and ventilated site that is free from environmental extremes.
One-to-two feet of clearance for cable connections.
An asynchronous terminal or PC (personal computer).
If desired, an operable Ethernet LAN (Local Area Network) connection for access
by an NMS (Network Management System)
Configuration information for the FrameSaver unit being installed or replaced.
Appropriate cables:
— DSX cable
— Data port cables
— COM port-to-terminal or COM port-to-PC cable
— Modem cable
— Ethernet cable, if applicable
See the User's Guide for additional information on:
Troubleshooting
Technical Specifications
Connectors, Cables, and Pin Assignments

Cables You May Need to Order

If connecting to a . . .
T1 line interface/connector
(For use in Canada )
LAN
(Model 9128 only)
Contact your sales representative to order cables.
Order a . . .
T1 line interface cable,
RJ48C-to-CA81A
Customer converter with a DB25
plug on one end and an 8-pin
modular jack on the other end, with
a custom 8-conductor cable and
LAN adapter
2
Model/Feature
Number
3100-F1-510
3100-F2-910