Paradyne FrameSaver SLV 9128 Installation Instructions Manual page 15

Setting Up Automatic Backup Configuration
The Automatic Backup Configuration feature, included on the Auto-Configuration menu,
is used to automatically create alternate DLCI records and PVC connections on the
ISDN DBM (backup) interface.
This feature is already set up in FrameSaver units with a DBM.
Single_Site_Backup is the default for a BRI DBM.
Multi_Site_Backup is the default for a PRI DBM.
See the User's Guide for additional information.
Modifying ISDN Link Profiles
1. Select Link Profiles, then Modify.
The FrameSaver unit automatically configures an ISDN Link Profile on the first
ISDN link, with HQ_Site as the Link Name. For subsequent ISDN Link Profiles,
select New.
2. Add a name and phone number to the ISDN Link Profile(s) created by Automatic
Backup Configuration.
– Name for the destination entered (e.g., Tampa). The default setting of HQ_Site.
– Phone numbers entered:
For Originating a Backup Call
Outbound and Alternate Outbound
phone numbers
Valid characters include:
Numbers (0 – 9)
Special characters * and #
Spaces
Parentheses ( )
NOTES:
Remember to include local dial-out numbers (i.e., 9, then the number).
For every originating (outbound) phone number entered, an answering
(inbound) phone number must be entered at the far end, and vice versa.
– Maximum Link Rate is changed, if necessary. The default setting is 64 kbps.
3. Save the configuration.
For Answering a Backup Call
Inbound Calling ID1 and ID2
These are the phone numbers
of units from which calls will be
accepted.
Valid characters include:
Numbers (0 – 9)
15