Robot Lawn Mower Recharge After Installation; Setting Up Virtual Boundaries, Transfer Routes And Areas To Be Avoided - Stiga A1500 Instruction Manual

WARNING:
The surface or pole on which the satellite reference station is mounted must be
stable and not move, sway or rotate, e.g. under strong wind or adverse weather
conditions. The movement of the satellite reference station a昀昀 ects the operating
accuracy of the robot lawn mower.
WARNING:
When installing the satellite reference station, proceed with caution. There is a
risk of falling from considerable heights or of falling objects.
WARNING:
If the satellite reference station is moved, the virtual boundaries, transfer routes
and areas to be avoided must be recon昀椀 gured through the APP.
WARNING:
Make sure that the satellite reference station is installed in a perfectly horizontal
position.
4.5.3. RECHARGE THE ROBOT LAWN MOWER AFTER INSTALLATION
Please recharge the robot lawn mower before proceeding with the programming of virtual boundaries.
Requirements and obligations:
• Docking station.
Procedure:
1. Recharge the robot lawn mower (See Par 5.5).
NOTE: When charged for the 昀椀 rst time, the batteries must remain connected for at least 2 hours.
4.6. PROGRAMMING VIRTUAL PERIMETERS, TRANSITION ROUTES AND AREAS TO BE
AVOIDED
The programming of the virtual perimeters, transition routes and areas to be avoided is performed using
the respective "STIGA.GO APP" wizards. The procedure requires you to guide the robot lawn mower
manually by walking alongside it according to the general instructions provided in chapter 4.4
Requirements and obligations:
• Android or iOS mobile device connected to the internet (not included).
EN 4. INSTALLATION 31