Connection With Intelligent I/O Units - Toshiba V Series User Manual

Chapter 1 Overview

1.3 Connection with Intelligent I/O Units

1
Name Model
Analog input AI01
universal
Analog input 1 AI02
to 5V
Analog input 1 AI03
to 5V
Analog input 1 AI06
to 5V
Thermocouple TC01
input
Resistance RT01
Temperature
Detector
Analog output AO01 8
Analog output AO02 4
Analog output AO06 8
Digital input DI01
Digital output DO01 32
Pulse input PI01
Pulse input PI06
Pulse output PO01 4
Loop I/O LP01
(Current output LP03
type)
Loop I/O (Pulse LP02
output type) LP04
(Notes 1) Up to 16 I/O modules can be connected to one I/O bus.
(Notes 2) There are two I/O bus communication rates: 19.2 and 375 Kbps. But the mixed use of both rates on the same I/
O bus is not allowed.
Name
IO bus terminal (ITU)
Relay unit
4
model 1000 is compatible with horizontal terminal blocks, and allows connection of
intelligent I/O units through an I/O bus. Table 1-2 shows a list of I/O units, and Table 1-3,
accessory units.
Table 1-2 List of I/O units
Number of
channels
8 One of 1 to 5V (4 to20mA)/mV/V/TC
4 Input: 1 to 5 V
4 Input: 1 to 5 V, with a distributor circuit
8 Input: 1 to 5 V
8 Input: K, J, T, E, B, R, S
4 Input: RTD Pt100, JPt100
Output: 4 to 20 mA
Output: 4 to 20 mA
Output: 4 to 20 mA
32 Input: No-voltage contact (A 24V power
supply from an external source is
required for an input circuit.)
Output: FET open drain (A 24V power
supply from an external source is
required for an output circuit.)
4 Input: No-voltage, voltage
4 Input: No-voltage, voltage
Output: No-voltage, voltage
1 loop Input:
AI: 1 to 5 V
DI: No-voltage contact 3 channels
Output:
MV: 4 to 20 mA
AO: 1 to 5 V
DO: FET open drain
1 loop Input:
AI: 1 to 5 V
DI: No-voltage contact 3 channels
Output:
MV: Pulse width
AO: 1 to 5 V
DO: FET open drain
Table 1-3 Accessory units
Type
UT5U11 IO Bus extension terminal block unit
3Y8A1406 G001 Output: Relay contact output, 16-point contact relay (made by
Omron), G7TC-OC16
Dedicated cable 1 m: 3Y8A1406 G002, 3m: 3Y8A1406 G003
Input/output
Not provided
Provided
Provided
Provided
Provided
Provided
Not provided
Provided
Provided
Not provided
Not provided
Not provided
Not provided
Not provided
Insulated
4 channels between AI/O and
DI/O, and
between AI/O and
1 channel power supply.
2 channels
3 channels
Insulated
4 channels between AI/O and
DI/O, and
between AI/O and
1 channel power supply.
2 channels
3 channels
Specification
model 1000 Loop Controller L1 User's Manual - Basic Hardware
Insulation
between IO bus rate
channels
19.2kbps
19.2kbps
19.2kbps
375kbps
19.2kbps
19.2kbps
19.2kbps
19.2kbps
375kbps
19.2kbps
19.2kbps
19.2kbps
375kbps
19.2kbps
LP01:
375kbps
LP03:
19.2kbps
LP02:
375kbps
LP04:
19.2kbps
Remarks
Remarks