Basic Configurations; Selecting The Menu Language; Configuration Of The Lan Interface - AVT MAGIC AE1 DAB+ Hardware & Software Manual

O p e r a t i o n v i a D i s p l a y
Menu reference number
P A GE 2 4
a n d K e y p a d
4.2

Basic configurations

In the following some specific basic configurations of MAGIC AE1 DAB+ are
described in detail.
NOTE
All menus can be reached directly via a QuickMenu key sequence. For this
purpose each menu item is marked with a cypher in the upper left corner (in
the example on the left it is e. g. ). To reach a certain menu directly please
enter from the main menu the key sequence
<digit> marks the respective menu reference number. Please notice that the
menu reference number can change depending on the configuration.
4.2.1

Selecting the menu language

In delivery status
select
NOTE
If you are not in the main menu please press the
First press the softkey
. Press the cursor key
in the menu. Via the
desired language. With the help of the cursor keys
the language and press again
Please confirm your entry be pressing the
To get back to the main menu, please press the
if you want to
manently in the system.
NOTE
If you press
switched off.
4.2.2

Configuration of the LAN Interface

To configure the LAN interface follow the instructions below:
– Press the
– Please mark the option
and press the
– Use the cursor keys
the
Select
tion
NOTE
The default IP address is 192.168.96.102. For further information take a look
at Page 30.
– Now you can enter the correct IP Address via the numerical keypad.
is selected as standard menu language. In order to
as menu language, please follow the instructions below:
and select
once until the option
softkey you directly reach the options for the
.
Via the
, all settings that you have made are lost when the unit is
softkey.
softkey.
and to get to the option
softkey.
and to enter or change the IP Address of the system, mark the op-
and press the softkey.
whereby
key first.
using the softkey
is displayed
and please choose
button or the softkey.
key. Now you are asked
softkey the settings are stored per-
via the cursor keys and
and press