Terminal Module Tm41 - Siemens SIMOTION D4 5 Series Manual

Supplementary system components

6.7 Terminal module TM41

6.7 Terminal module TM41
TM41 characteristics
With the TM41 Terminal Module, the number of available digital inputs/digital outputs and the
number of analog inputs within a drive system can be expanded. In addition, the TTL output
can be used for encoder emulation. The TM41 is connected by means of DRIVE-CLiQ.
The TB41 contains the following terminals:
Table 6- 34
Type
Digital inputs
Digital inputs/outputs
Analog inputs
TTL encoder output
The 50 mm clearances above and below the component must be observed.
Additional references
You will find detailed information about the TM41 terminal module in the
●
●
110
Interface overview
CAUTION
SINAMICS S120 Control Units and Supplementary System Components
SIMOTION D4x5
Commissioning and Hardware Installation Manual
Quantity
4
4
1
1
Manual
SIMOTION D4x5
Manual, 02/2012