Specifications For Protection Class And Degree Of Protection - Siemens SIMOTION D4 5 Series Manual

4.4

Specifications for Protection Class and Degree of Protection

Class of protection
Safety class I in accordance with VDE 0106, Part 1 (IEC 536), i.e. a protective-conductor
terminal is required on the mounting rail.
Protection against ingress of solid foreign bodies and water
IP20 degree of protection in accordance with IEC 529, i.e. protection against contact with
standard probes.
Also: Protection against ingress of solid foreign bodies with diameters greater than 12.5 mm.
No special protection against ingress of water.
SIMOTION D4x5
Manual, 02/2012
4.4 Specifications for Protection Class and Degree of Protection
Technical data
67